|Grade||Shore Hardness||Temperature Range||General Description||Technical Specification|
|General Purpose||40° – 80°||-60 to 200°C||Good all round physical properties and available in a range of shore hardnesses. FDA approved.||TDS|
|40° – 70°||-60 to 200°C||Good tensile and wear strength. Uses include peristaltic pumps. FDA approved.||TDS|
|High Temperature||40° – 70°||-60 to 300°C||Excellent high temp resistance. Retains properties over long periods when exposed to harsh temps.||TDS|
|Flame Retardant||50° – 75°||-60 to 250°C||Flame retardant, low smoke and low toxicity grades. BS6853 and UL V0 grades also available if required.||TDS|
|Electrically Conductive||70°||Up to 200°C||Low resistance <10 Ohms. Commonly used in microwave shielding applications.||TDS|
|Platinum Cured||60°||Up to 200°C||Very pure silicone content with no by products remaining. Mainly used in medical applications. FDA approved.||TDS|
|Metal Detectable||40° – 80°||-60° to 200°C||Can be detected by metal detector equipment. Good resistance to oxygen, hot air and ozone.||TDS|
|Steam Resistant||60°||Up to 250°C||Developed for the manufacture of articles requiring good resistance to steam. FDA approved.||TDS|
|60°||-60° to 250°C||Can be detected by metal detector equipment. Good resistance to steam. FDA approved.||TDS|
|Low Temperature||63°||Down to -100°C||Designed to provide extended service when used in low temperatures.||TDS|
|Specialist Grades||–||–||Oil resistant and high filler content grades are available if required.||–|
Our metal detectable silicone rubber strip has been tested to fulfil the global migration criteria as specified in FDA 21 CFR 177.2600 through extraction in n-hexane and deionized water.
* Although our metal detectable rubber is detectable by the majority of metal detection and X-ray devices we are unable to offer any guarantees and recommend that you test the material with your equipment.
Printed Silicone Extrusions
Our Silicone extrusions may be printed with our product code and website at approximately 1m intervals along the length for ease of re-order. Click on the image below for an example of a printed profile. If you require your extrusion without branding or with bespoke branding please state this as a headline in writing when making your enquiry.
|Printed Silicone Extrusion|